KAWASAKI Z650 2017 TO 2022 PC6 BY DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING
KAWASAKI Z650 2017 TO 2022 PC6 BY DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING
THIS IS THE NEW POWER COMMANDER 6 (PC6) FUEL AND IGNITION CONTROLLER FROM DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING FOR 2017 - 2022 KAWASAKI Z650
CHECK VEHICLE FITMENT BELOW
Part number PC6-17072 covered under EO D-619-6 for 2017-2020 model years only. Not available for sale or use in California for any model year outside this range.
IF YOU PLACE AN ORDER THAT HAS A CALIFORNIA ADDRESS YOUR ORDER WILL BE CANCELED AND REFUNDED. WE CAN NOT SHIP TUNING DEVICES TO CALIFORNIA. IF YOU HAVE QUESTIONS CALL OR EMAIL US PLEASE. 360-910-8377 BLRTUNING.TECH@GMAIL.COM
SKU # PC6-17072
-
KAWASAKI
- ZR650 Z650 ABS - 2017, 2018
- ZR650 Z650 - 2017, 2018
- ER650 Z650 - 2019, 2020, 2021, 2022
- ER650 Z650 ABS - 2019, 2020, 2021, 2022
- ER650 Z650RS - 2022
PC6 - $465.99
SHIPPING - $12.60
TUNING ADD - $145
2-STEP ADD - $30
13,500 RPM REV LIMIT - $10
YES WE DO KNOW THAT SOME OF OUR PHOTOS SHOW PCV. AS WE GET MORE PHOTOS WE WILL BE UPDATING AND REMOVING THOSE PICTURES. PLEASE UNDERSTAND WHEN YOU PLACE YOUR ORDER YOU WILL BE RECEIVING A PC6 AS WE CAN NO LONGER GET PCV SINCE IT HAS BEEN DISCONTINUED.
THIS IS BY FAR ONE OF THE BEST TUNING DEVICES ON THE MARKET. IT CAN TUNE THE OPEN LOOP SECTION OF YOUR BIKES FACTORY FUEL MAP.
EASY INSTALLATION JUST CLICK THIS TEXT FOR OUR INSTALL VIDEO IN THIS VIDEO WE ARE USING A 21 Z400. THE ONLY DIFFERENCE IS THE PLASTIC PANELS ON THE NINJA AS FAR AS THE INSTALL. IN THE VIDEO WE ARE INSTALLING THE OLDER PCV BUT THE INSTALL WOULD BE EXACTLY THE SAME FOR PC6. PCV WAS DISCONTINUED AND HAS BEEN REPLACED WITH PC6 SO IF YOU PLACE YOUR ORDER YOU'LL BE GETTING A PC6. PC6 USES DYNO JETS POWER CORE SOFTWARE WHICH IS A MUCH MORE SUPERIOR SOFTWARE THAN THE POWER COMMANDER 5 SOFTWARE WHICH WAS USED PREVIOUSLY WITH OLDER DEVICES.
IT'S NOT JUST A FUEL CONTROLLER. THINK OF THE PC6 HAS A MASTER HUB FOR EVERYTHING TO PLUG INTO.
IT CAN RUN THESE DEVICES AND MORE...
2-STEP LAUNCH CONTROL (YES WE CARRY IT) IT WILL WORK IF YOU HAVE THE PUSH TO FLASH HIGH BEAM SWITCH
POD 300 DISPLAY (YES WE CARRY IT), QUICK SHIFT, WB2, AUTOTUNE
THIS DEVICE CAN CONTROL FUEL TABLES, IGNITION TIMING, REV LIMIT, LAUNCH CONTROL, MAP SWITCHING, WHEN YOU ADD WB2 IT CAN CONTROL TARGET AFR, AUTO TUNE TRIMS AND SO MUCH MORE.
I HAVE LOTS OF VIDEOS ON MY YOUTUBE CHANNEL SHOWING OFF PC6. JUST CLICK ON THIS TEXT.
IF YOU WANT CUSTOM TUNING PRELOADED ON YOUR PC6 THEN JUST SELECT THE OPTION THAT SAYS YES ADD A CUSTOM TUNE - AFTER YOUR ORDER IS PLACED EMAIL , TEXT, OR CALL US SO WE CAN GATHER ALL THE DETAILS TO BUILD YOUR TUNE. EMAIL - BLRTUNING.TECH@GMAIL.COM PH# - 360-910-8377
YOU CAN ALSO SELECT YOUR REV LIMIT TO BE RAISED TO 13,500 RPM WICH IS STILL SAFE FOR A STOCK MOTOR. STOCK REV LIMIT IS 12,500 RPM SOME MODELS THIS MAY VARY. WE USALLY RAISE THE REV LIMIT 600 ABOVE STOCK. JUST REQUEST A DIFFERENT NUMBER IF YOU WISH. AFTER SELECTING RAISED REV LIMIT AND ORDERING.
BLRTUNING.TECH@GMAIL.COM
PH# 360-910-8377 ASK FOR BILL
WE DO INSTALL WORK AS WELL. WE ARE LOCATED IN VANCOUVER, WASHINGTON
The Power Commander 6 is a unique EFI tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU. To reinstate your stock settings, all you need to do is uninstall the device, and you’re done.
Our Power Commander 6 fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander 6 takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead.
Better than ever (and smaller than ever), Power Commander 6 now has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander 6 map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander 6 can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.
- Compact design for discrete placement & easy uninstallation to revert to stock settings
- Vast library of tunes for any combination of aftermarket parts
- Easily change & upgrade tunes as you upgrade parts
- Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
- Upgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)
- Analog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
- Easily connects to your computer via USB
- Each cylinder can be mapped individually and for each gear, giving riders more granular control
- One year warranty
- Proudly made in the USA
UPGRADABLE POWER
Our Power Commander 6 is a powerful tuning device on its own, but what makes it a real powerhouse is the other compatible upgrades. From Ignition Modules for adjusting timing to Quick shifters and more, our Power Commander 6 is the first step for a full bike overhaul.
FOR TRACK AND OFF ROAD USE ONLY