CAN-AM RYKER Roll Pin Punch Tool FOR SECONDARY CLUTCH ROLLER REPLACEMENT

CAN-AM RYKER Roll Pin Punch Tool – Made in USA

• This 1/8-Inch Roll Pin Punch Tool is a heavy-duty, Made in the USA roll pin punch specifically designed for removing and installing 1/8-inch roll pins.

This is the tool you need for removing the C-channel roll pins in the Can-Am Ryker secondary clutch. The secondary clutch rollers are retained by T27 Torx bolts, but before those bolts can be removed, the roll pins locking the bolts in place must first be punched out.

You have to have this tool in order to remove the RYKER secondary rollers.

Can-Am Ryker Secondary Clutch:

• On the Can-Am Ryker secondary clutch, the two secondary clutch rollers are held in place with T27 Torx bolts. The 1/8-inch roll pins lock those bolts in position and must be removed before the roller bolts can be removed.

This long-reach 1/8-inch roll pin punch provides the reach and precision needed to properly remove these pins.

The punch also features a guide ball at the end of the shaft, allowing you to use the same tool to properly install the new roll pins back into the secondary clutch.

Features:

• - 1/8-inch roll pin punch
• - Long-reach 1/8-inch shaft
• - Guide ball at the end of the punch
• - Designed for both removing and installing 1/8-inch roll pins
• - Specifically designed for secondary clutch maintenance
• - Made from high-grade tool steel
• - Very heavy-duty construction
• - Made in the USA
• - Universal fit for most CVT secondary clutch maintenance
• - Perfect fit for Can-Am Ryker secondary clutches
• - Works with all Can-Am Ryker models from 2019–2026
• - Fits 600, 900 ACE, Rally, and Sport models

Perfect for Can-Am Ryker Secondary Clutch Service

This roll pin punch is an essential tool when servicing the Can-Am Ryker secondary clutch. Without the proper 1/8-inch roll pin punch, removing the roller retaining bolts can be extremely difficult and risks damaging the roll pins or surrounding components.

It is also useful for other CVT secondary clutches that use 1/8-inch roll pins, making it a versatile addition to your powersports tool collection.

Need the Other Tools?

We also carry the T27 Torx Socket you will need for removing the secondary clutch roller bolts on the Can-Am Ryker — CLICK HERE

We sell this 1/8-Inch Roll Pin Punch Tool as part of our Secondary Clutch Maintenance Tool Kit — CLICK HERE

We also offer the 1/8-Inch Roll Pin Punch Tool with our Secondary Clutch Compression Tool — CLICK HERE

If you're servicing a Can-Am Ryker secondary clutch, this is one tool you don't want to be without.

NO EXTRA CHARGE AT CHECKOUT FOR SHIPPING