THIS IS THE DYNOJET QUICK SHIFT (QS) FOR THE YAMAHA WR250R and WR250X 08-20 MODELS FOR PCV OR PC6
DISCLAIMER: Not legal for sale or use in California
YOU MUST HAVE POWER COMMANDER 5 OR 6 (PCV or PC6) INSTALLED FOR THIS QS KIT TO WORK.
WE DO CARRY PC6 FOR THE YAMAHA WR250R AND WR250X 08-20 - CLICK THE LINK BELOW. WHEN PC6 IS ORDERED WITH QS FROM US. WE SET EVERYTHING UP FOR YOU. ALL YOU NEED TO DO IS THE INSTALL. IF YOU ARE IN THE PNW AREA WE OFFER INSTALL WORK AS WELL. https://www.blrtuning.co/products/yamaha-wr250r-wr250x-2008-2020-pc6-by-dynojet-with-optional-custom-tuning-by-blr-tuning
SHIPPING ANYWHERE IN THE US IS INCLUDED AT NO EXTRA CHARGE
THIS WILL ALLOW CLUTCHLESS SHIFTING GOING INTO THE NEXT GEAR
ONCE INSTALLED YOU WILL NEED TO OPEN PCV SOFTWARE OR DYNOJET C3 SOFTWARE TO TURN ON THE QUICK SHIFT (QS) SETTING. PC6 USES C3 FOUND IN POWER CORE. IF PURCHASED WITH A PC6 THEN IT WILL BE SET UP RIGHT OUT OF THE BOX, READY TO INSTALL. NO SOFTWARE NEEDED.
AFTER INSTALLED, AT WIDE OPEN THROTTLE ABOVE 3,000 RPM SIMPLY SHIFT INTO THE NEXT GEAR WITHOUT USING THE CLUTCH AND WITHOUT ROLLING OFF THE THROTTLE
WITH A QUICK SHIFT INSTALLED YOU WILL BE FASTER THAN THE SAME BIKE WITHOUT A QUICK SHIFT.
WITH NORMAL SHIFTING, USING THE CLUTCH AND NO QS YOU CAN NOT GRAB THE CLUTCH AND ROLL OFF THE THROTTLE QUICKER THAN SOMEONE BANGING GEARS USING A QS.
QUICK SHIFT IS THE STANDARD FOR DRAG RACING AND TRACK RACING.
THIS CAN KILL FUEL AND IGNITION DURING EACH SHIFT UP INTO THE NEXT GEAR.
WILL NOT WORK FOR CLUTHLESS DOWN SHIFTING. (example - 3rd to 2nd)
NEED YOUR BIKE TUNED? REACH OUT TO US - 360-910-8377 BLRTUNING.TECH@GMAIL.COM
CUSTOM TUNING IS FOR TRACK AND OFF-ROAD USE ONLY
SHIPPING IS INCLUDED - THERE WILL BE NO ADDITIONAL COST AT CHECK OUT
