Ir directamente a la información del producto
1 de 4

DYNOJET & BLR TUNING

YAMAHA XSR 700 2015 - 2024 PC6 BY DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING

YAMAHA XSR 700 2015 - 2024 PC6 BY DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING

Precio habitual $478.59 USD
Precio habitual $530.36 USD Precio de oferta $478.59 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
CUSTOM TUNING OPTION BY BLR TUNIG
RAISD REV LIMIT 700 RPM ABOVE STOCK - STILL SAFE FOR STOCK ENGINE
2-STEP LAUNCH CONTROL

THIS IS THE NEW POWER COMMANDER 6 (PC6) FUEL & IGNITION CONTROLLER FROM DYNOJET WITH OPTIONAL CUSTOM TUNING BY BLR TUNING FOR YAMAHA 2015 - 2024 XSR700 MODELS

Part number PC6-22078 covered under EO D-619-6 for 2018-2019 model years only.  Not available for sale or use in California for any model year outside this range.

SKU # PC6-22078

IF YOU WANT A CUSTOM TUNE - YOU WILL NEED TO CONTACT US WITH A LIST OF YOUR PERFORMANCE PARTS FOR US TO BUILD YOUR CUSTOM TUNE.

SEND US AN EMAIL AND INCLUDE YOUR ORDER #, NAME, AND PHONE NUMBER SO WE CAN CONTACT YOU.

BLRTUNING.TECH@GMAIL.COM

360-910-8377

FITMENTS

  • YAMAHA

    • XSR700 - 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

PRICING - 

PCV- $465.99

SHIPPING - $12.60

TUNING ADD - $145

RAISED REV LIMIT 700 RPM ABOVE STOCK - $10.00

2-STEP LAUNCH CONTROL - 35.00

ADDING A CUSTOM TUNE. MEANS WE BUILD A TUNE JUST FOR YOUR BIKE AND THE LIST OF PERFORMANCE PARTS YOU GIVE US. WE DO THIS FROM SCRATCH FROM THE GROUND UP EVERY SINGLE TIME. SO BE SURE TO LEAVE US A CONTACT NUMBER OR EMAIL ADDRESS SO WE CAN GET IN TOUCH WITH YOU. YOUR CUSTOM TUNE WILL BE INSTALLED ON THE PC6 READY TO GO RIGHT OUT OF THE BOX. ALL YOU NEED TO DO IS INSTALL THE PC6 ONTO THE BIKE.

ADDING A 700 RPM ABOVE STOCK REV LIMIT. THIS MEANS IN THE PC6 WE SET YOUR REV LIMIT 700 RPM ABOVE STOCK. THIS IS STILL SAFE FOR THE STOCK MOTOR. THIS IS PRE SET ON YOUR PC6. SO THE PC6 IS READY TO INSTALL RIGHT OUT OF THE BOX.

ADDING 2-STEP LAUNCH CONTROL. THIS IS OUR LAUNCH CONTROL PC6 HARNESS. IT USES YOUR SMALL PUSH TO PASS OR PUSH TO FLASH HIGH BEAM FLASHER SWITCH MOSTLY FOUND ON THE LEFT SIDE HANDLEBAR CONROL PANEL HOUSING IN FRONT. THIS HARNESS WILL GET INSTALLED SO THAT SWITCH WILL NOW ACTIVATE 2-STEP INSTEAD OF FLASHING THE HIGH BEAM HEADLIGHT/S . DON'T WORRY YOUR HIGH BEAM / LOW BEAM ON OFF SWITCH WILL STILL WORK AS NORMAL. WHEN YOU SQUEEZE YOUR CLUTCH AND YOUR BIKE IS AT IDLE RPM. SQUEEZE THIS BUTTON AND HLOD FOR 0.5 SECONDS. NOW GO FULL THROTTLE. YOULL NOTICE THE BIKE WILL ONLY REV TO A SSET RPM REV LIMIT UNTIL THE BUTTON IS RELEASED. SO NOW FIRST GEAR, HOLD IN CLUTCH, HOLD IN BUTTON, 100% ON THROTTLE. LET OUT THE CLUTCH AND KEEP THE BUTTON HELD UNTIL YOU KNOW YOU HAVE CONTROL OF THE BIKE. THEN LET GO OF BUTTON. THIS MEANS A CONSISTENT LAUNCH THATS THE SAME EVERY TIME. CONSISTENCY WINS RACES. THIS WILL COME PRE SET WHEN YOU SELECT TO ADD LAUNCH CONTROL. ALL YOU NEED TO DO IS INSTALL THE PC6 AND THE LAUNCH CONTROL HARNESS. YOU CAN DOWNLOAD THE DYNOJET POWER CORE SUITE SOFTWARE FROM DYNOJET FOR FREE. THEN YOU CAN ADJUST THE LAUNCH CONTROL SETTING HOWEVER YOU LIKE. INSTRUCTION VIDEO COMES IN THE BOX VIA QR CODE. HERE IS THE INSTALL VIDEO FOR OUR 2-STEP LAUNCH CONTROL. https://www.youtube.com/watch?v=whqQjs2tGh8&t=2s

THIS IS THE BRAND NEW PC6 WHICH HAS REPLACED THE PCV. STILL ALL THE SAME GREAT FEATURES. PC6 USES DYNOJETS POWER CORE SOFTWARE WHICH IS FREE TO DOWNLOAD ON THEIR WEBSITE. THE POWER CORE SOFTWARE IS A MUCH MORE SUPERIOR SOFTWARE THAN THE PREVIOUS PCV SOFTWARE THAT OLDER MODELS USE. YES WE DO KNOW THAT SOME OF OUR PHOTOS SHOW PCV. AS WE GET MORE PHOTOS WE WILL BE UPDATING AND REMOVING THOSE PICTURES. PLEASE UNDERSTAND WHEN YOU PLACE YOUR ORDER YOU WILL BE RECEIVING A PC6 AS WE CAN NO LONGER GET PCV SINCE IT'S BEEN DISCONTINUED.

HERE IS A VIDEO OF OUR SHOP OWNED 21 Z400 TUNED BY US USING PCV SHOOTING FLAMES AT NIGHT. CLICK THIS TEXT.

THIS IS BY FAR ONE OF THE BEST TUNING DEVICES ON THE MARKET. IT CAN TUNE THE OPEN LOOP FUEL SECTION OF YOUR BIKES FACTORY FUEL MAP. FOR ADJUSTMENTS TO IGNITION TIMING YOU WILL NEED THE IGNITION MODULE ADDE TO THE BIKE.

EASY INSTALLATION JUST CLICK THIS TEXT FOR OUR INSTALL VIDEO

IN THE VIDEO WE ARE USING A DIFFERENT BIKE AS A DEMO OF THE PROCESS HOWEVER THE PROCESS IS SIMILAR. THERE IS INSTRUCTIONS INCLUDED.

IT'S NOT JUST A FUEL CONTROLLER. THINK OF THE PC6 HAS A MASTER HUB FOR EVERYTHING TO PLUG INTO.

IT CAN RUN THESE DEVICES AND MORE...

2-STEP LAUNCH CONTROL (YES WE CARRY IT), POD 300 DISPLAY (YES WE CARRY IT), QUICK SHIFT, WB2, AUTOTUNE

THIS DEVICE CAN CONTROL - FUEL TABLES, REV LIMIT, MAP SWITCHING, WHEN YOU ADD WB2 IT CAN CONTROL TARGET AFR, AUTO TUNE TRIMS AND SO MUCH MORE.

WE HAVE LOTS OF VIDEOS ON MY YOUTUBE CHANNEL SHOWING OFF PCV. JUST CLICK ON THIS TEXT.

CLICK THIS TEXT TO SEE INSTALL VIDEO FOR OUR 2-STEP

The Power Commander 6 is a unique EFI tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU. To reinstate your stock settings, all you need to do is uninstall the device, and you’re done.

Our Power Commander 6 fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander 6 takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead.

Better than ever (and smaller than ever), Power Commander 6 now has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander 6 map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander 6 can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.

  • Compact design for discrete placement & easy uninstallation to revert to stock settings
  • Vast library of tunes for any combination of aftermarket parts
  • Easily change & upgrade tunes as you upgrade parts
  • Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
  • Upgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)
  • Analog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • Easily connects to your computer via USB
  • Each cylinder can be mapped individually and for each gear, giving riders more granular control
  • One year warranty
  • Proudly made in the USA

UPGRADABLE POWER

Our Power Commander 6 is a powerful tuning device on its own, but what makes it a real powerhouse is the other compatible upgrades. From Ignition Modules for adjusting timing to Quick shifters and more, our Power Commander 6 is the first step for a full bike overhaul.

FOR TRACK AND OFF ROAD USE ONLY

WE RECOMMEND READING OUR RETURN POLICY BEFORE PLACING AN ORDER

DO YOU ALREADY HAVE A TUNING DEVICE ON YOUR BIKE? IF YOU NEED A CUSTOM TUNE AND YOU ALREADY HAVE A TUNING DEVICE INSTALLED SEND US AN EMAIL OR GIVE US A PHONE CALL. WE CAN STILL DO THE TUNING FOR YOU.

360-910-8377  blrtuning.tech@gmail.com

Ver todos los detalles