QUICK SHIFT QS UNIVERSAL DUAL CONTACT SENSOR FOR PCV OR PC6 BY DYNOJET

THIS IS THE DUAL CONTACT QUICK SHIFTER FROM DYNOJET

IT WORKS WITH POWER COMMANDER 5 (PCV) OR POWER COMMANDER 6 (PC6)

DISCLAIMER: Not legal for sale or use in California

SHIPPING IS INCLUDED AT NO EXTRA CHARGE AT CHECKOUT

THIS IS NOT A STAND ALONE QUICK SHIFTER. YOU HAVE TO HAVE PCV OR PC6 FOR THIS QS TO WORK.

BECAUSE THIS IS A DUAL CONTACT SENSOR, THIS MEANS IT CAN BE SET UP FOR PUSH OR PULL DEPENDING ON YOUR BIKES SHIFT LINKAGE SET UP.

YOU WILL ALSO NEED THE CORRECT SHIFT ROD LINKAGE PIECES TO GO WITH THIS QS SENSOR FOR IT TO WORK PROPERLY.

THE QUICK SHIFT SETTINGS CAN BE ACCESSED IN THE DYNOJET POWERCORE / C3 SOFTWARE. YOU CAN SET SHIFT TIMES PAER GEAR, SET TO KILL POWER BASED ON FUEL OR IGNITION TIMING OR BOTH. SOME BIKES WILL HAVE DIFFERENT SETTINGS THAN OTHERS. SOME BIKES WILL ONLY ALLOW KILLING FUEL FOR QUICK SHIFT. THIS IS STILL A VERY SMOOTHY TRANSITION WITH FULL THROTTLE NO LIFT NO CLUTCH SHIFTING UP INTO THE NEXT GEAR.

THIS QS CAN NOT DO AUTO BLIP (DOWN SHIFTING)

DEFAULT SETTINGS IS USALLY 3,000 TO 4,000 RPM OR ABOVE AND FULL THROTTLE TO QUICK SHIFT WITHOUT THE CLUTCH INTO THE NEXT GEAR. (1-2-3-4-5-6)

IF YOU HAVE A DYNOJET QS INSTALLED AND IT WAS DAMMAGED SOMEHOW THEN THIS WOULD BE THE REPLACEMENT FOR THAT PART. IT IS SKU# 4-130

IF YOU ARE UNSURE ABOUT WHAT ALL YOU NEED FOR THIS (QS) QUICK SHIFTER TO WORK ON YOUR BIKE CALL OR EMAIL US BEFORE YOU PLACE AN ORDER.

THIS IS A ELECTRONIC DEVICE. WE DO NOT EXCEPT RETURNS ON ELECTRONIC DEVICES.

OUR PH# 360-910-8377  EMAIL - BLRTUNING.TECH@GMAIL.COM